Standardized Test Methods

Standardized Laboratory Techniques and Test Methods


Immersion Testing (SIT) Corrosion Testing of Non-Metallics (NMT)
Multi-Phase Corrosion Testing (MPT) Non-Metallic Corrosion Test Rating System (NMCT)
Crevice Corrosion Testing (CCT) Lubricant Hydrolysis (LH)
Acceptance Testing (SSAT) Constant Temp. Bath Immersion Testing (CTB)
Hot Wall Testing  (HWT) Hydrogen Induced Cracking (HIC) Testing
Glass Multi-Specimen Testing (GMST) Water Extractions Methods for Solid Samples (WE)
Examination and Evaluation of Pitting (PIT) DOT Metal Test (DOT)
Potentiodynamic Polarization Testing (PPT) DOT Skin Test (DOT)
Severe Wastewater Accelerated Test (SWAT) Atmospheric Testing (AT)
Velocity Testing (VT)


A262 Practice A (Oxalic Acid Etch) G1 Preparation, Cleaning, Evaluating Test Specimens
A262 Practice B (Streicher Test) G3 Conventions Applicable to E/C Measurements
A262 Practice C (Huey Test) G5 Potentiostatic/Potentiodynamic Anodic Polarization
A262 Practice E (Modified Strauss Test) G28 Method A (Ferric Sulfate/Sulfuric Acid)
A380 Cleaning and Descaling Stainless Steels G28 Method B (PEMT)
A923 SSAT Duplex  Stainless Steels G31 Immersion Testing
B154 Mercurous Nitrate – Copper and Copper Alloys G36 Boiling Magnesium Chloride
C871 Extraction of Leachable Ions G44 Alternate Immersion Testing
D2240 Rubber Property Durometer Hardness G47 Stress Corrosion Cracking of Aluminum
D2583 Barcol Hardness G48 Ferric Chloride Pitting and Crevice Tests
D4340 Pressurized Hot Wall G61 Cyclic Potentiodynamic Polarization
E3 Standard Metallographic Practice G71 Galvanic Couple Test
E45 Inclusion Content G102 Calculation of Corrosion Rates from E/C Measurements
E112 Grain Size G108 E/C Reactivation for Detecting Sensitization
F746 Medical Implants G123 Boiling Sodium/Calcium/Lithium Chloride
F2129 E/C Testing of Surgical Implants G150 Critical Pitting Temperature
F3044 Galvanic Testing of Surgical Implants G210 Severe Wastewater Analysis Test
A90/A90M Weight of Zinc Coatings
B813 Liquid and Paste Fluxes for Soldering Copper




TM0169 Standard Immersion ISO 6509 Dezincification of Brass Corrositex™ Assay
TM0174 Protective Coatings ISO 10271 Corrosion of
Dental Materials
DuPont SW800M SSAT
TM0177 Sulfide Stress Corrosion ISO 3651 Resistance to Intergranular Corrosion DuPont  SW1P Ferroxyl Test
TM0284 Resistance to Hydrogen Induced Cracking (HIC) ISO 7539 Stress Corrosion Testing
TM 0187 Elastomeric Materials in Sour Gas ISO 9400 Ni-Based Alloys Intergranular Corrosion



MTI – 1 Standard Immersion Method 1110 Corrosivity Towards Steel
MTI – 2 Ferric Chloride Crevice Method 9031 Extractable Sulfides
MTI – 3 Boiling MgCl