Corrosion, Failure Analysis and Materials Selection Specialists

 

 

 

 

 

Corrosion Testing / Failure Analysis / Chemical Analysis

 

 

 

Corrosion Testing

Failure Analysis

Field Investigations

Litigation

Metallography

Chemical Analysis

Technical Papers

CTL Profile

Pricing & Policies

Contact CTL

Quality Assurance

 

 CTL - WEBSITE INDEX

CORROSION TESTING

ASTM Corrosion Testing Standards

NACE, ISO, MTI Corrosion Testing Standards

ASTM G 36 - Stress Corrosion Cracking in a Boiling Magnesium Chloride Solution
ASTM F2129 - Electrochemical Corrosion Testing of Surgical Implants
ASTM G28 - Detecting Susceptibility to Intergranular Corrosion
Electrochemistry, DOT/EPA Corrosivity Tests, Heat Transfer Tests and Immersion Tests

FAILURE ANALYSIS

Typical Failure Analysis and Reporting
Facility
Scanning Electron Microscope (SEM)
Energy Dispersive X-Ray Spectrometer (EDS)
Fourier Transform InfraRed Spectroscopy (FTIR)

Chloride Stress Corrosion Cracking in Type 304 Stainless Steel Underground Piping

Stress Corrosion Cracking in Type 304H Stainless Steel Piping

Stress Corrosion Cracking on Steel Fasteners in a HVAC System

Erosion Corrosion in a Copper Water System

Oxygen Corrosion of Carbon Steel Tubes in Hot Water Boilers

Under Coating Corrosion on Sliver Plated Copper

Fatigue Cracking of an Inlet Nozzle in a Crude Unit

Mechanical Fatigue Failure of an Aluminum Antenna

Thermal Fatigue in an Overhead Line within an Oil Refinery

Long Term Overheating of Carbon Steel

Dezincification of Brass Heat Exchanger Tubes

Cracking on  Screwdriver Blade Initiated by Nickel Plating

Stress Corrosion Cracking of Copper Tube in Evaporator

Mechanical Fatigue of Stainless Steel Shaft

Dezincification of Brass Wax Actuator

Fatigue Cracking of  Steam Bellow Expansion Line

Polythionic Stress Corrosion Cracking of Stainless Steel Tube

Rouging of Stainless Steel

Corrosion of Iron Piping in a Fire Sprinkler System

Stress Corrosion Cracking of Unused Copper Tube from Air Conditioner Coil

Atmospheric Corrosion of Galvanized Steel

Chloride Induced Stress Corrosion Cracking of Stainless Steel Water Still

Corrosion of Heat Exchanger Copper Tube Assembly

Pitting of Copper in Heat Exchanger System

Under Coating Corrosion of Tin Coated Copper

Denickelification of Cupronickel Tubing in an Oil Refinery

Technical Brief: Denickelification of Cupronickel Tubes

Corrosion Fatigue Failure Analysis of Copper Tubes in a Subcooler

Failure Analysis of an Incomplete Weld in a Carbon Steel Gas Main Pipe

Corrosion of a Stainless Steel Handrail caused by Fabrication Process

Nitrate Corrosion of a Sight Glass Housing

Formicary Corrosion of Copper Tubes in a Chiller

Failure Analysis of an Incomplete Weld in a HDPE Reducer

Pitting of Copper Condenser Tubes

Formicary Corrosion of Unused Copper Tubes

Failure Analysis of a Mechanical Fatigued Stainless Steel Shaft

Mechanical Fatigue Failure Analysis of Stainless Steel Bolts

Technical Brief on Fatigue Failure

Failure Analysis of Corroded Rupture Discs

Chemical Reactions of Microbiologically Influenced Corrosion (MIC)
Technical Brief: Erosion Corrosion
Galvanic Effects in Carbon Bed Absorbers
A Multidisciplinary Approach Gets to the Root Cause of a Failed Shaft
Microbiologically Influenced Corrosion Attacks Welds Before Component Is Put Into Service
The Case Of The Vanishing Molybdenum

TECHNICAL PAPERS

An Assessment of ASTM F2129 Electrochemical Corrosion Testing of Small Medicla Devices - Lesson Learned
Rouging of Stainless Steel
FORMICARY CORROSION [aka ANT NEST CORROSION] An Introduction to Case Studies
FORMICARY CORROSION [aka ANT-NEST CORROSION]
Laboratory Corrosion Testing of Medical Implants
Ni-Cr-Mo Alloys as Corrosion Barrier for the Rad-Waste Containers
Inhibition of Heavy Metal Ion Corrosion on Aluminum in Fresh Water Cooling Systems Using Propylene Glycol Anti-Freeze
CORROSION CONTROL DESIGN CONSIDERATIONS FOR A NEW WELL WATER LINE
Material Selection for the Defense Waste Processing Facility
The Development of a Laboratory Test to determine the Mechanisms and Effects of Organic Fluids on Copper Coils
Problems in Utilizing ASTM G48 to Evaluate High-Alloy Stainless Steel

FIELD ASSESSMENTS

LITIGATION

PRICES & POLICIES

CTL's-Terms & Conditions
Brochure and Price List

ABOUT CORROSION TESTING LABORATORIES

BRADLEY D. KRANTZ, Vice-President of Laboratory Services
SHARI NATHANSON ROSENBLOOM, Ph.D., Director of Failure Analysis and Biomedical Devices
FRED M. SHERMAN, Senior Corrosion Technologist
DAVE SEVERANCE, Corrosion Technician
PETER ELLIOTT, Corrosion Specialist
 
 
 

QUALITY ASSURANCE

Quality Assurance Manual

Site Index

Site Copyright 1995 - 2012, All Rights Reserved,

Corrosion Testing Laboratories, Inc.

60 Blue Hen Drive

Newark, Delaware USA 19713

Phone: 1-302-454-8200

Fax: 1-302-454-8204

web@corrosionlab.com