Corrosion, Failure Analysis and Materials Selection Specialists

 

 

 

 

 

Corrosion Testing / Failure Analysis

 

 

 

Corrosion Testing

Failure Analysis

Field Investigations

Litigation

Metallography

Technical Papers

CTL Profile

Pricing & Policies

Contact CTL

Quality Assurance

 

ASTM Testing

MTI Testing

NACE Testing

ISO TESTING CAPABILITIES

   
3651 Austenitic Stainless Steel Determination of Resistance to Intergranular Corrosion - Part I: Corrosion Test in Nitric Acid Medium by Measurement of Loss in Mass (Huey Test)
 
6509 Corrosion of Metals and Alloys Determination of Dezincation Resistance of Brass
 
7539-2 Corrosion of Metals and Alloys Stress Corrosion Testing - Part 2: Preparation and Use of Bent Beam Specimens
 
7539-3 Corrosion of Metals and Alloys Stress Corrosion Testing - Part 3: Preparation and Use of U-Bend Specimens
 
7539-5 Corrosion of Metals and Alloys  Stress Corrosion Testing - Part 5: Preparation and Use of C-Ring Specimens
 
9400 Nickel-Based Alloys Determination of Resistance to Intergranular Corrosion
 
9591 Corrosion of Aluminum Alloys Determination of Resistance to Stress Corrosion Cracking

 

MTI TESTING CAPABILITIES

 

MTI­ 1 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Corrosion in Selected Media

 

MTI­ 2 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Crevice Corrosion in a Standard Ferric Chloride Solution

 

MTI­ 3 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Stress-Corrosion Cracking in a Boiling Magnesium Chloride Solution

 
MTI­ 4 Method for Laboratory Testing of Wrought Iron-and Nickel-Base Alloys for Relative Resistance to Crevice Corrosion in Sodium Chloride Solutions

 

NACE TESTING CAPABILITIES

   
TM 0169    Laboratory Corrosion Testing of Metals
 
TM 0174    Laboratory Methods for the Evaluation of Protective Coatings and Lining Materials in Immersion Service
 
TM 0177    Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in H2S Environments
 
TM 0284    Evaluation of Pipeline Steels for Resistance to Stepwise Cracking
 
TM 0187    Evaluating Elastomeric Materials in Sour Gas Environments
 
TM 0190    Impressed Current Test Method for Laboratory Testing of Aluminum Anodes
 
TM 0193    Laboratory Corrosion Testing of Metals in Static Chemical Cleaning Solutions at Temperatures below 93C (200F)

   

ADDITIONAL TEST METHODS

SW846-1110    Corrosivity Toward Steel (EPA test)
   
49 CFR 173.137 DOT Measurement of Metal Corrosion

Site Index

Site Copyright 1995 - 2007, All Rights Reserved,

Corrosion Testing Laboratories, Inc.

60 Blue Hen Drive

Newark, Delaware USA 19713

Phone: 1-302-454-8200

Fax: 1-302-454-8204

web@corrosionlab.com